News

Spain: Widening the Rande Bridge

The widening of this iconic bridge required the installation of 80 Freyssinet stay cables.

Station F inaugurated - Flashback on the Halle Freyssinet repair works

Freyssinet restored the 30,000 m² concrete surface of the world's largest startup campus

Cathodic protection for the port of Ajaccio

Freyssinet France teams recently completed repair works for Ajaccio's commercial port. On the agenda in this major project: reprofiling, shotcrete reinforcement and application of impressed current and sacrificial anode cathodic protection on the Capucins and Trois Marie breakwaters.

[VIDEO] Hammersmith Flyover repair works

"We innovated, invented, adapted, found solutions". A video flashback on Hammersmith Flyover repair works.

Pinklao Bridge, Bangkok: a major repair work

Since March 2015 Freyssinet Thailand has been working on repairing Pinklao Bridge in Bangkok. Rejuvenating this old prestressed bridge using Foreva ® TFC (Carbon Fiber Fabric) is a great challenge for our team.

Work begins on the Halle Freyssinet!

Freyssinet is responsible for restoring 30,000m² of concrete surfaces

Larivot Bridge: a makeover for the bridge over the Cayenne River

Mexico - Coatzalcoacos I bridge repair

The Coatzacoalcos I Bridge lies south-east of the city of Coatzacoalcos on federal highway 180 between Matamoros and Puerto Juárez, in the State of Veracruz, Mexico. Opened in 1962, this road and railway lift bridge required considerable repair and reinforcement work, which was carried out in several stages between September 2011 and October 2014.

Freyssinet UK organizes a seminar on structural repair

As part of its commitment to the Construction Industry, Freyssinet UK will be hosting on September 30th a seminar in Hammersmith, London to discuss structural repair, geotechnical and refurbishment techniques.

Extending the life of Hammersmith Flyover - second step of the strengthening works

After the first phase of work to repair the Hammersmith Flyover before the London Olympic Games in 2012, Freyssinet has been chosen again for the second step. Work to strengthen the structure, with the bearings replaced, a new carriageway drainage system installed and the entire flyover waterproofed and resurfaced, has started in January 2014.

UK - Freyssinet complete a concrete repair and bridge bearing replacement job at the M6 Toll over the river Cole

Freyssinet were engaged by Midland Expressway Ltd to carry out inspections on a number of structures on the M6 Toll Road. During these inspections, it was identified that existing longitudinal guide bearings on the River Cole Bridge were defective. These bridge bearings were adopted by the toll road from existing road networks. Freyssinet were then instructed to provide a solution to re-instate the required guidance of the deck.

Freyssinet repairs the Pont Mathilde in Rouen

The Seine-Maritime Department chose Freyssinet for repair works to the Mathilde Bridge in Rouen, damaged by a severe fire in October 2012.

Bucharest - Seismic devices for the City Hall

Freyrom (Freyssinet in Romania) performed the isolation of the Bucharest City Hall base

Versailles "Grand Commun": strengthening a historical monument

Freyssinet France is involved in a huge restoration programme, commenced in 2010, to breathe new life into the façades and interiors of the historical monument.

Hammersmith Flyover, London, United Kingdom

Emergency repair before the 2012 Olympic Games: Freyssinet supplied and installed the additional post-tensioning allowing the re-opening of the flyover - a key point for the londonian traffic.

Panneciere dam strengthening

Freyssinet repaired the Panneciere lake dam, in Burgundy (France). Built in 1949 on the river Yonne, the dam needed a complete strengthening.

Maintenance of the ANZAC Bridge - a large-scale project and a world first

The ANZAC Bridge in Sydney provides a link between the central business district and the city's western suburbs. Freyssinet was involved in a huge maintenance program launched to reduce the vibration phenomenon in the stay cables

Sliding the Cavalcavia Bridge

On the night of 9-10 March 2013, Freyssinet slid the Cavalcavia Bridge in Switzerland into position.